diff options
Diffstat (limited to '.agents/skills/ml-paper-writing/templates/acl/acl_latex.tex')
| -rw-r--r-- | .agents/skills/ml-paper-writing/templates/acl/acl_latex.tex | 377 |
1 files changed, 377 insertions, 0 deletions
diff --git a/.agents/skills/ml-paper-writing/templates/acl/acl_latex.tex b/.agents/skills/ml-paper-writing/templates/acl/acl_latex.tex new file mode 100644 index 0000000..2eba2f1 --- /dev/null +++ b/.agents/skills/ml-paper-writing/templates/acl/acl_latex.tex @@ -0,0 +1,377 @@ +\documentclass[11pt]{article} + +% Change "review" to "final" to generate the final (sometimes called camera-ready) version. +% Change to "preprint" to generate a non-anonymous version with page numbers. +\usepackage[review]{acl} + +% Standard package includes +\usepackage{times} +\usepackage{latexsym} + +% For proper rendering and hyphenation of words containing Latin characters (including in bib files) +\usepackage[T1]{fontenc} +% For Vietnamese characters +% \usepackage[T5]{fontenc} +% See https://www.latex-project.org/help/documentation/encguide.pdf for other character sets + +% This assumes your files are encoded as UTF8 +\usepackage[utf8]{inputenc} + +% This is not strictly necessary, and may be commented out, +% but it will improve the layout of the manuscript, +% and will typically save some space. +\usepackage{microtype} + +% This is also not strictly necessary, and may be commented out. +% However, it will improve the aesthetics of text in +% the typewriter font. +\usepackage{inconsolata} + +%Including images in your LaTeX document requires adding +%additional package(s) +\usepackage{graphicx} + +% If the title and author information does not fit in the area allocated, uncomment the following +% +%\setlength\titlebox{<dim>} +% +% and set <dim> to something 5cm or larger. + +\title{Instructions for *ACL Proceedings} + +% Author information can be set in various styles: +% For several authors from the same institution: +% \author{Author 1 \and ... \and Author n \\ +% Address line \\ ... \\ Address line} +% if the names do not fit well on one line use +% Author 1 \\ {\bf Author 2} \\ ... \\ {\bf Author n} \\ +% For authors from different institutions: +% \author{Author 1 \\ Address line \\ ... \\ Address line +% \And ... \And +% Author n \\ Address line \\ ... \\ Address line} +% To start a separate ``row'' of authors use \AND, as in +% \author{Author 1 \\ Address line \\ ... \\ Address line +% \AND +% Author 2 \\ Address line \\ ... \\ Address line \And +% Author 3 \\ Address line \\ ... \\ Address line} + +\author{First Author \\ + Affiliation / Address line 1 \\ + Affiliation / Address line 2 \\ + Affiliation / Address line 3 \\ + \texttt{email@domain} \\\And + Second Author \\ + Affiliation / Address line 1 \\ + Affiliation / Address line 2 \\ + Affiliation / Address line 3 \\ + \texttt{email@domain} \\} + +%\author{ +% \textbf{First Author\textsuperscript{1}}, +% \textbf{Second Author\textsuperscript{1,2}}, +% \textbf{Third T. Author\textsuperscript{1}}, +% \textbf{Fourth Author\textsuperscript{1}}, +%\\ +% \textbf{Fifth Author\textsuperscript{1,2}}, +% \textbf{Sixth Author\textsuperscript{1}}, +% \textbf{Seventh Author\textsuperscript{1}}, +% \textbf{Eighth Author \textsuperscript{1,2,3,4}}, +%\\ +% \textbf{Ninth Author\textsuperscript{1}}, +% \textbf{Tenth Author\textsuperscript{1}}, +% \textbf{Eleventh E. Author\textsuperscript{1,2,3,4,5}}, +% \textbf{Twelfth Author\textsuperscript{1}}, +%\\ +% \textbf{Thirteenth Author\textsuperscript{3}}, +% \textbf{Fourteenth F. Author\textsuperscript{2,4}}, +% \textbf{Fifteenth Author\textsuperscript{1}}, +% \textbf{Sixteenth Author\textsuperscript{1}}, +%\\ +% \textbf{Seventeenth S. Author\textsuperscript{4,5}}, +% \textbf{Eighteenth Author\textsuperscript{3,4}}, +% \textbf{Nineteenth N. Author\textsuperscript{2,5}}, +% \textbf{Twentieth Author\textsuperscript{1}} +%\\ +%\\ +% \textsuperscript{1}Affiliation 1, +% \textsuperscript{2}Affiliation 2, +% \textsuperscript{3}Affiliation 3, +% \textsuperscript{4}Affiliation 4, +% \textsuperscript{5}Affiliation 5 +%\\ +% \small{ +% \textbf{Correspondence:} \href{mailto:email@domain}{email@domain} +% } +%} + +\begin{document} +\maketitle +\begin{abstract} +This document is a supplement to the general instructions for *ACL authors. It contains instructions for using the \LaTeX{} style files for ACL conferences. +The document itself conforms to its own specifications, and is therefore an example of what your manuscript should look like. +These instructions should be used both for papers submitted for review and for final versions of accepted papers. +\end{abstract} + +\section{Introduction} + +These instructions are for authors submitting papers to *ACL conferences using \LaTeX. They are not self-contained. All authors must follow the general instructions for *ACL proceedings,\footnote{\url{http://acl-org.github.io/ACLPUB/formatting.html}} and this document contains additional instructions for the \LaTeX{} style files. + +The templates include the \LaTeX{} source of this document (\texttt{acl\_latex.tex}), +the \LaTeX{} style file used to format it (\texttt{acl.sty}), +an ACL bibliography style (\texttt{acl\_natbib.bst}), +an example bibliography (\texttt{custom.bib}), +and the bibliography for the ACL Anthology (\texttt{anthology.bib}). + +\section{Engines} + +To produce a PDF file, pdf\LaTeX{} is strongly recommended (over original \LaTeX{} plus dvips+ps2pdf or dvipdf). +The style file \texttt{acl.sty} can also be used with +lua\LaTeX{} and +Xe\LaTeX{}, which are especially suitable for text in non-Latin scripts. +The file \texttt{acl\_lualatex.tex} in this repository provides +an example of how to use \texttt{acl.sty} with either +lua\LaTeX{} or +Xe\LaTeX{}. + +\section{Preamble} + +The first line of the file must be +\begin{quote} +\begin{verbatim} +\documentclass[11pt]{article} +\end{verbatim} +\end{quote} + +To load the style file in the review version: +\begin{quote} +\begin{verbatim} +\usepackage[review]{acl} +\end{verbatim} +\end{quote} +For the final version, omit the \verb|review| option: +\begin{quote} +\begin{verbatim} +\usepackage{acl} +\end{verbatim} +\end{quote} + +To use Times Roman, put the following in the preamble: +\begin{quote} +\begin{verbatim} +\usepackage{times} +\end{verbatim} +\end{quote} +(Alternatives like txfonts or newtx are also acceptable.) + +Please see the \LaTeX{} source of this document for comments on other packages that may be useful. + +Set the title and author using \verb|\title| and \verb|\author|. Within the author list, format multiple authors using \verb|\and| and \verb|\And| and \verb|\AND|; please see the \LaTeX{} source for examples. + +By default, the box containing the title and author names is set to the minimum of 5 cm. If you need more space, include the following in the preamble: +\begin{quote} +\begin{verbatim} +\setlength\titlebox{<dim>} +\end{verbatim} +\end{quote} +where \verb|<dim>| is replaced with a length. Do not set this length smaller than 5 cm. + +\section{Document Body} + +\subsection{Footnotes} + +Footnotes are inserted with the \verb|\footnote| command.\footnote{This is a footnote.} + +\subsection{Tables and figures} + +See Table~\ref{tab:accents} for an example of a table and its caption. +\textbf{Do not override the default caption sizes.} + +\begin{table} + \centering + \begin{tabular}{lc} + \hline + \textbf{Command} & \textbf{Output} \\ + \hline + \verb|{\"a}| & {\"a} \\ + \verb|{\^e}| & {\^e} \\ + \verb|{\`i}| & {\`i} \\ + \verb|{\.I}| & {\.I} \\ + \verb|{\o}| & {\o} \\ + \verb|{\'u}| & {\'u} \\ + \verb|{\aa}| & {\aa} \\\hline + \end{tabular} + \begin{tabular}{lc} + \hline + \textbf{Command} & \textbf{Output} \\ + \hline + \verb|{\c c}| & {\c c} \\ + \verb|{\u g}| & {\u g} \\ + \verb|{\l}| & {\l} \\ + \verb|{\~n}| & {\~n} \\ + \verb|{\H o}| & {\H o} \\ + \verb|{\v r}| & {\v r} \\ + \verb|{\ss}| & {\ss} \\ + \hline + \end{tabular} + \caption{Example commands for accented characters, to be used in, \emph{e.g.}, Bib\TeX{} entries.} + \label{tab:accents} +\end{table} + +As much as possible, fonts in figures should conform +to the document fonts. See Figure~\ref{fig:experiments} for an example of a figure and its caption. + +Using the \verb|graphicx| package graphics files can be included within figure +environment at an appropriate point within the text. +The \verb|graphicx| package supports various optional arguments to control the +appearance of the figure. +You must include it explicitly in the \LaTeX{} preamble (after the +\verb|\documentclass| declaration and before \verb|\begin{document}|) using +\verb|\usepackage{graphicx}|. + +\begin{figure}[t] + \includegraphics[width=\columnwidth]{example-image-golden} + \caption{A figure with a caption that runs for more than one line. + Example image is usually available through the \texttt{mwe} package + without even mentioning it in the preamble.} + \label{fig:experiments} +\end{figure} + +\begin{figure*}[t] + \includegraphics[width=0.48\linewidth]{example-image-a} \hfill + \includegraphics[width=0.48\linewidth]{example-image-b} + \caption {A minimal working example to demonstrate how to place + two images side-by-side.} +\end{figure*} + +\subsection{Hyperlinks} + +Users of older versions of \LaTeX{} may encounter the following error during compilation: +\begin{quote} +\verb|\pdfendlink| ended up in different nesting level than \verb|\pdfstartlink|. +\end{quote} +This happens when pdf\LaTeX{} is used and a citation splits across a page boundary. The best way to fix this is to upgrade \LaTeX{} to 2018-12-01 or later. + +\subsection{Citations} + +\begin{table*} + \centering + \begin{tabular}{lll} + \hline + \textbf{Output} & \textbf{natbib command} & \textbf{ACL only command} \\ + \hline + \citep{Gusfield:97} & \verb|\citep| & \\ + \citealp{Gusfield:97} & \verb|\citealp| & \\ + \citet{Gusfield:97} & \verb|\citet| & \\ + \citeyearpar{Gusfield:97} & \verb|\citeyearpar| & \\ + \citeposs{Gusfield:97} & & \verb|\citeposs| \\ + \hline + \end{tabular} + \caption{\label{citation-guide} + Citation commands supported by the style file. + The style is based on the natbib package and supports all natbib citation commands. + It also supports commands defined in previous ACL style files for compatibility. + } +\end{table*} + +Table~\ref{citation-guide} shows the syntax supported by the style files. +We encourage you to use the natbib styles. +You can use the command \verb|\citet| (cite in text) to get ``author (year)'' citations, like this citation to a paper by \citet{Gusfield:97}. +You can use the command \verb|\citep| (cite in parentheses) to get ``(author, year)'' citations \citep{Gusfield:97}. +You can use the command \verb|\citealp| (alternative cite without parentheses) to get ``author, year'' citations, which is useful for using citations within parentheses (e.g. \citealp{Gusfield:97}). + +A possessive citation can be made with the command \verb|\citeposs|. +This is not a standard natbib command, so it is generally not compatible +with other style files. + +\subsection{References} + +\nocite{Ando2005,andrew2007scalable,rasooli-tetrault-2015} + +The \LaTeX{} and Bib\TeX{} style files provided roughly follow the American Psychological Association format. +If your own bib file is named \texttt{custom.bib}, then placing the following before any appendices in your \LaTeX{} file will generate the references section for you: +\begin{quote} +\begin{verbatim} +\bibliography{custom} +\end{verbatim} +\end{quote} + +You can obtain the complete ACL Anthology as a Bib\TeX{} file from \url{https://aclweb.org/anthology/anthology.bib.gz}. +To include both the Anthology and your own .bib file, use the following instead of the above. +\begin{quote} +\begin{verbatim} +\bibliography{anthology,custom} +\end{verbatim} +\end{quote} + +Please see Section~\ref{sec:bibtex} for information on preparing Bib\TeX{} files. + +\subsection{Equations} + +An example equation is shown below: +\begin{equation} + \label{eq:example} + A = \pi r^2 +\end{equation} + +Labels for equation numbers, sections, subsections, figures and tables +are all defined with the \verb|\label{label}| command and cross references +to them are made with the \verb|\ref{label}| command. + +This an example cross-reference to Equation~\ref{eq:example}. + +\subsection{Appendices} + +Use \verb|\appendix| before any appendix section to switch the section numbering over to letters. See Appendix~\ref{sec:appendix} for an example. + +\section{Bib\TeX{} Files} +\label{sec:bibtex} + +Unicode cannot be used in Bib\TeX{} entries, and some ways of typing special characters can disrupt Bib\TeX's alphabetization. The recommended way of typing special characters is shown in Table~\ref{tab:accents}. + +Please ensure that Bib\TeX{} records contain DOIs or URLs when possible, and for all the ACL materials that you reference. +Use the \verb|doi| field for DOIs and the \verb|url| field for URLs. +If a Bib\TeX{} entry has a URL or DOI field, the paper title in the references section will appear as a hyperlink to the paper, using the hyperref \LaTeX{} package. + +\section*{Limitations} + +This document does not cover the content requirements for ACL or any +other specific venue. Check the author instructions for +information on +maximum page lengths, the required ``Limitations'' section, +and so on. + +\section*{Acknowledgments} + +This document has been adapted +by Steven Bethard, Ryan Cotterell and Rui Yan +from the instructions for earlier ACL and NAACL proceedings, including those for +ACL 2019 by Douwe Kiela and Ivan Vuli\'{c}, +NAACL 2019 by Stephanie Lukin and Alla Roskovskaya, +ACL 2018 by Shay Cohen, Kevin Gimpel, and Wei Lu, +NAACL 2018 by Margaret Mitchell and Stephanie Lukin, +Bib\TeX{} suggestions for (NA)ACL 2017/2018 from Jason Eisner, +ACL 2017 by Dan Gildea and Min-Yen Kan, +NAACL 2017 by Margaret Mitchell, +ACL 2012 by Maggie Li and Michael White, +ACL 2010 by Jing-Shin Chang and Philipp Koehn, +ACL 2008 by Johanna D. Moore, Simone Teufel, James Allan, and Sadaoki Furui, +ACL 2005 by Hwee Tou Ng and Kemal Oflazer, +ACL 2002 by Eugene Charniak and Dekang Lin, +and earlier ACL and EACL formats written by several people, including +John Chen, Henry S. Thompson and Donald Walker. +Additional elements were taken from the formatting instructions of the \emph{International Joint Conference on Artificial Intelligence} and the \emph{Conference on Computer Vision and Pattern Recognition}. + +% Bibliography entries for the entire Anthology, followed by custom entries +%\bibliography{custom,anthology-overleaf-1,anthology-overleaf-2} + +% Custom bibliography entries only +\bibliography{custom} + +\appendix + +\section{Example Appendix} +\label{sec:appendix} + +This is an appendix. + +\end{document} |